Rubber Bumper Complete A/C Kit

Complete a/c system for 1977-1981 rubber bumper MGBs.  This kit is the designed to fit into any rubber bumper without altering the original appearance of the vehicle.  The evaporator unit mounts under the passenger side of the glove box with additional vent outlets on the driver side, and the center indash vents.  The condenser requires the radiator to be relocated to the opposite side of the core support, we include all the necessary hardware to do this.  The drier is located on the driver side as the original aftermarket kits were installed, with a hose looping around the outside of the engine bay.   The compressor is mounted onto the engine with our newly designed engine mount.  We have spent the last two years perfecting this bracket.  It is designed to bolt on the passenger side of the engine with the alternator located above the compressor.  We use an idler pulley to tension the compresor, and the compressor to tension the alternator.  The two betls required are included with the a/c kit.    This kit will work with R-12 and R-134a refrigerant.

This kit includes:

• Evaporator unit with mounting hardware
• Expansion valve
• Compressor (Sanden 505)
• Compressor mount bracket with idler pulley, hardware, and belts
• Condenser with mount brackets
• Hoses Pre-crimped to fit
• Drier
• High Low pressure switch
• All necessary mounting hardware
• Directions

This kit is manufactured by Nostalgic Air Parts in the USA.